Frequent question: How do you reset the maintenance light on a Toyota?

How do I turn off the maintenance required light?

Toyota Maintenance Required Light

  1. Turn the key to the on position.
  2. Next, determine that the odometer reading is displayed. …
  3. Then turn the key back off.
  4. Now push and hold the reset button for the trip meters. …
  5. Finally, while continuing to depress the reset button, turn the key back to the “on” position, but not so far as the “start” position.

3 апр. 2020 г.

How do I turn off the maintenance required light on my Toyota Corolla?

How to Reset the Maintenance Light in a Toyota Corolla

  1. Turn the ignition switch to the “Off” position.
  2. Press and hold the Trip Odometer Reset button.
  3. Turn the ignition switch to the “On” position. Do not start the engine. Continue to hold down the Trip Odometer Reset button.

How do you reset the maintenance light on a 2015 Toyota Corolla?

Press and hold the trip reset button near the odometer until “Trip A” appears on the screen. Turn the key to the “Off” position. While pressing the reset button, turn the key back into the “On” position. Continue holding the button until the miles section on the odometer flashes zero.

IT IS INTERESTING:  Is Toyota platinum warranty transferable?

How do you reset the maintenance required light on a 2013 Toyota Corolla?

Depress the odometer button until your dash readout shows TRIP A. Switch the car OFF but keep the odometer button held down. With the odometer button held down, turn the key to the ON position again. Wait 5-10 seconds as the lines clear your odometer and reset your maintenance light.

Why is my maintenance required light on after oil change?

The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop. Changing the oil in your Toyota can improve fuel efficiency and make your vehicle run as smooth as silk.

What causes a maintenance required light to come on?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. … Most often this just means your vehicle might be due for an oil change.

How do I turn off the maintenance required light on my Toyota Prius?

To reset the “maintenance required” light on a toyota prius, press the power button twice, using the odo button below the multi-function display, press to cycle through and stop on the odo reading, press the power button once to power your prius down, press and hold down the odo button and press the power button twice …

How do you turn off the maintenance required light on a Toyota Tacoma?

To turn off the maintenance light on your toyota tacoma, start by turning the key to the on position. then, press and hold the odometer button. while still holding the odometer button, turn the key to the off position.

IT IS INTERESTING:  Question: Does Toyota always own Lexus?

How do you reset the maintenance light on a 2015 Toyota RAV4?

To reset the maintenance light on a 2015 toyota rav4, first turn the ignition to on, then set the odometer to read “odo”. turn ignition to off. push and hold the trip reset button at the same time turning the ignition back to on.

How do you reset the maintenance required light on a 2008 Toyota Corolla?

Turn Off Maintenance Light – Toyota Corolla

Turn the key to the “ON” position, but don’t start the car. Press and hold the trip reset button near the odometer until “Trip A” appears on the central screen. Turn the key back to “OFF.” While pressing the button to reset the trip, turn the key back to the “ON” position.

Bullock Toyota