What does it mean when my Toyota says maintenance required?
The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop. Changing the oil in your Toyota can improve fuel efficiency and make your vehicle run as smooth as silk.
What does it mean when your maintenance required light stays on?
The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. … Most often this just means your vehicle might be due for an oil change.
What does it mean when my car says maintenance required soon?
Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. … Sometimes shops neglect to reset the maintenance-required meter if the light doesn’t happen to be on yet when they are changing the oil.
How do I turn off the maintenance light in my Toyota?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
How do I reset my Toyota maintenance?
How to Reset Your Toyota Maintenance Light in 5 Steps
- Insert your ignition key into the ignition. …
- Press and hold the trip reset button near the odometer until “Trip A” appears on the center screen. …
- Turn your key back to the “Off” position. …
- Turn your key back to the “On” position.
What is routine maintenance required?
Routine maintenance means the normal and usual type of repair or replacement necessary as the result of periodic maintenance inspections or normal wear and tear of a local correctional facility or equipment.
How serious is the maintenance required light?
It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.
Is the maintenance required light the same as check engine?
Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.
How do you turn off the maintenance required light on a 2015 Toyota Corolla?
Turn the key to the “Off” position. While pressing the reset button, turn the key back into the “On” position. Continue holding the button until the miles section on the odometer flashes zero. The light should then go off.
How long can you go with your maintenance light on?
How long can you drive without an oil change after the oil change light comes on? After your car’s oil change light comes on, you should get the oil changed within the next two weeks. At most, once that light comes on, you should get the oil changed before the next 500 miles of driving.
How long do you have to get an oil change after light comes on?
On vehicles with an oil change light, an oil change is needed when the light remains on after startup. It’s best to schedule the oil change within one to two weeks. If you primarily do highway driving, you have a little more breathing room than city driving.
How do you reset the maintenance required light?
How do I reset the “Maint Reqd” light?
- Turn ignition switch to the ON position.
- Set the Odometer/Trip Display to TRIP A mode.
- Turn the ignition switch to the OFF position.
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
- The Service Maintenance Reminder Light will.
How do you turn off the maintenance required light on a Toyota Tacoma?
To turn off the maintenance light on your toyota tacoma, start by turning the key to the on position. then, press and hold the odometer button. while still holding the odometer button, turn the key to the off position.
How do you turn off the maintenance required light on a Toyota Highlander?
How to Reset the Maintenance Required Light for a Toyota…
- Turn the ignition switch to the “On” position but do not crank the engine.
- Press the odometer button until the total mileage shows on the display.
- Press and hold the odometer button. Turn the ignition on again.