How do you reset the maintenance required light on a 2013 Toyota Camry?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
How do you reset the maintenance required light on a 2012 Toyota Camry Hybrid?
To reset the maintenance light on a 2012 toyota camry hybrid first put the vehicle in the on position with the engine off, hold down the odometer reset button, and then turn the car to the off position and then back to the on position.
How do you reset the maintenance light on a 2013 Toyota?
How To Reset a Toyota Corolla Maintenance Light
- Put the key in the ignition.
- Turn to the “ON” position.
- Depress the odometer button until your dash readout shows TRIP A.
- Switch the car OFF but keep the odometer button held down.
- With the odometer button held down, turn the key to the ON position again.
18 нояб. 2014 г.
How do you reset maintenance light on Toyota Camry?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
Can I drive with maintenance required light on?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
Why did my maintenance required light come on?
The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. … Most often this just means your vehicle might be due for an oil change.
How do you reset the check engine light on a Toyota Camry hybrid?
1. Using a Scan Tool
- Connect the scan tool to the onboard diagnostic connector. This is found under the steering column. …
- Press the READ button on the scan tool, and look for any error codes.
- Press the ERASE button on the tool to remove the error code. The check engine light will then turn off.
How do you reset the maintenance required light on a 2008 Toyota Camry Hybrid?
For the 2008 Camry you’ll need to do the same except do this at TRIP A. Set TRIP A to 0.0, turn off then turn back to ON while holding the odometer button down. Continue to hold the ODO button until you see dashes at the bottom then it goes to 000000. The Maint Req light will go off.
How do you reset the maintenance light on a 2014 Toyota Camry Hybrid?
Put the key in the ignition and put it in position one without starting the car. press and hold odometer button down. while doing so, put the key in position 2. continue holding down the odometer until the maintenance light turns off.
How do I turn off the maintenance required light?
Turn the key to the “On” position, but don’t start the car. Press and hold the trip reset button near the odometer until “Trip A” appears on the center screen. Keep holding the trip reset button. Turn your key back to the “Off” position.
How do you turn off the maintenance required light on a Toyota RAV4?
Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out. Once off, release the odometer button and start the car. If the light is still on, repeat this process once or twice to turn off the maintenance light on the Toyota RAV4.
How do you reset the dash light on a Toyota?
How to Reset Toyota Maintenance Lights
- Turn the key towards the starting position in the ignition.
- Make sure the odometer reading is displayed once your car’s electrical system is on. …
- Then turn the key back towards the off position.
- Press and hold the reset button for the trip meters.
How do you reset the maintenance light on a 2016 Toyota Camry?
To reset the maintenance required light on a 2016 toyota camry, press and hold the odometer button down on the dashboard. Put the key to position 2. Hold the odometer button until the light goes out.