How do you reset the oil maintenance light on a 2012 Toyota Sienna?

How do you reset the maintenance required light on a Toyota Sienna?

Turn your ignition key to the ‘ACC’ or ‘LOCK’ position. Press and hold the trip meter reset nob (next to your Toyota Sienna’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Sienna. Hold the meter reset until the MAINT REQD light switches off.

How do you reset the maintenance light on a 2012 Toyota?

Start car and use the reset button to move odometer reading to Trip A. Shut off engine. With foot off the brake, depress the Start button three times, while holding down the reset button. Continue holding for a few seconds and you’ll see the Maint Required light turn off.

How do you reset the maintenance light on a 2011 Toyota Sienna?

To reset the 2011 toyota sienna oil maintenance light put the key in the on position, turn the key off, press and hold the odo/reset button and turn the key back to the on position without starting the engine.

IT IS INTERESTING:  How do you reset the tire pressure light on a 2018 RAV4?

What does the maintenance required light mean on a Toyota Sienna?

Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. … Sometimes shops neglect to reset the maintenance-required meter if the light doesn’t happen to be on yet when they are changing the oil.

How do you turn off the maintenance required light on a Toyota push start?

Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.

Why did my maintenance required light come on?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. … Most often this just means your vehicle might be due for an oil change.

How do you reset the maintenance required light on a 2010 Toyota Sienna?

Toyota Maintenance Required Light

  1. Turn the key to the on position.
  2. Next, determine that the odometer reading is displayed. …
  3. Then turn the key back off.
  4. Now push and hold the reset button for the trip meters. …
  5. Finally, while continuing to depress the reset button, turn the key back to the “on” position, but not so far as the “start” position.

3 апр. 2020 г.

How do you reset the maintenance light on a 2015 Toyota Sienna?

Press and hold the Trip Odometer Reset button. Turn the ignition switch to the “On” position. Do not start the engine. Release the Trip Odometer Reset button after “000000” appears on the trip odometer display and the maintenance light turns off.

IT IS INTERESTING:  How much is a starter for a 2007 Toyota rav4?

How much oil does a 2011 Sienna take?

The SAE 0W-20 engine oil is the best choice for good fuel economy and good starting in cold weather. The engine oil capacity for the 2011 Toyota Sienna 3.5L (2GR-FE) engine is 6.4 quarts (6.1 Liters) and the engine oil capacity for 2.7L (1AR-FE) engine is 4.7 quarts (4.4 Liters).

What does the master warning light on a Toyota Sienna mean?

Master warning light The master warning light also comes on or flashes in order to indicate that a message is currently being displayed on the multi-information display.

How do you reset the maintenance light on a 2006 Toyota Sienna?

How to Reset the “Maintenance Required” Light on My 2006 Toyota Sienna Van

  1. Start your car and wait for the LCD odometer display to come up to the left of your steering wheel. …
  2. Turn off the car, and hold down the odometer button. …
  3. Wait for the maintenance light to blink and go out, while still holding down the button.
Bullock Toyota