How do you turn off the maintenance required light on a 2011 Toyota Camry?

Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.

How do you reset maintenance light on Toyota Camry?

Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.

What does the maintenance required light mean on a 2011 Toyota Camry?

The Toyota maintenance required light, displayed on the Toyota Camry dashboard as MAINT REQD, was created to help remind drivers of when their next service appointment for an oil change is due. This dashboard warning light is not tied to any vehicle sensors and does not indicate any vehicle malfunctions.

IT IS INTERESTING:  Quick Answer: How much fuel does a Prius use?

How do I turn off the maintenance required light?

Turn the vehicle off. Press and hold the odometer/trip display button while turning the ignition switch to ON, or pressing the push start button once. Remember: never use the brakes or fully turn the car on! Keep holding the button down until the maintenance required light turns off.

How do you reset the maintenance required light on a 2012 Toyota Camry?

Start car and use the reset button to move odometer reading to Trip A. Shut off engine. With foot off the brake, depress the Start button three times, while holding down the reset button. Continue holding for a few seconds and you’ll see the Maint Required light turn off.

What does it mean when maintenance required light is on Toyota Camry?

Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset.

How do you turn off the maintenance required light on a 2014 Toyota Camry?

Put the key in the ignition and put it in position one without starting the car. press and hold odometer button down. while doing so, put the key in position 2. continue holding down the odometer until the maintenance light turns off.

Can I drive with maintenance required light on?

Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.

IT IS INTERESTING:  How do you reset the maintenance required light on a 2006 Toyota Highlander?

What does it mean when your maintenance required light stays on?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. … Most often this just means your vehicle might be due for an oil change.

Why does maintenance required light come on?

The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.

How do you turn off the maintenance required light on a Toyota push start?

Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.

How long do you have to get an oil change after light comes on?

On vehicles with an oil change light, an oil change is needed when the light remains on after startup. It’s best to schedule the oil change within one to two weeks. If you primarily do highway driving, you have a little more breathing room than city driving.

How do you reset the maintenance light on a 2012 Toyota Yaris?

Toyota Maintenance Required Light

  1. Turn the key to the on position.
  2. Next, determine that the odometer reading is displayed. …
  3. Then turn the key back off.
  4. Now push and hold the reset button for the trip meters. …
  5. Finally, while continuing to depress the reset button, turn the key back to the “on” position, but not so far as the “start” position.
IT IS INTERESTING:  How do you turn on traction control on a Rav4 2018?

3 апр. 2020 г.

How do you reset the dash light on a Toyota?

How to Reset Toyota Maintenance Lights

  1. Turn the key towards the starting position in the ignition.
  2. Make sure the odometer reading is displayed once your car’s electrical system is on. …
  3. Then turn the key back towards the off position.
  4. Press and hold the reset button for the trip meters.
Bullock Toyota